The AeroPress Go is thoughtfully engineered to provide all the delicious brewing capabilities of the original AeroPress plus a convenient drinking mug that doubles as a carrying case. Like the original AeroPress, the AeroPress Go brews remarkably delicious American, espresso, and cold brew style coffee. The AeroPress Go is optimized for traveling, camping, or just going to work by making it convenient and easy to take your AeroPress with you. Its smart design ensures that you will never be without delicious AeroPress brewed coffee wherever you go.
Plunger Chamber Filter Cap Stirrer Scoop 350 Paper Filters Filter Holder Travel Cup Cup Lid
An engineered shower head has been designed to disperse water evenly across the coffee at not only a consistent height but also at a specific flow rate.
A more efficient saturation can be achieved for the bloom part of brewing, wetting all of the coffee grounds in seconds without needing to stir.
No more high and dry coffee grounds:
The vertical walls result in all of the coffee being in all of the water all of the time.
Laboratory grade filter paper:
The German manufactured paper delivers a more consistent pore structure. With a smaller filter size than other devices you get less paper taint in your coffee.
Extract more coffee:
The 80mm wide flat brew bed increases surface area and allows for more even water to coffee contact, this results in a higher extraction.
No need for an expensive goose neck kettle:
Achieve much higher extraction yields than ever before. Taste coffee that has greater balance, sweetness and clarity.
Packaging & Material:
For the best heat stability and durability the device is made from Tritan® plastic. Tritan® doesn’t contain BPA, BPS or any other bisphenols. It is a clear plastic that retains its colour and gloss even after hundreds of dishwasher cycles. The device is injection moulded in Australia.
AeroPress Replacement Filters
This pack comes with 350 AeroPress replacement filters, which equates to about 1 years worth of delicious AeroPress made coffees!
The world’s first adjustable gravity-fed water filter designed specifically to optimise brewing water for coffee making.
You could say it was a ‘watershed’ moment for the coffee industry when three-time UK barista champion Maxwell Colonna-Dashwood and PhD chemist Christopher Hendon co-wrote the book ‘Water for Coffee’ in 2015. The book highlighted the very real effect of water quality on the result in the cup.
Lively discussions abounded both at professional specialty coffee events and online, culminating in a sort watery milestone last week when a dedicated water forum was established as part of the influential online community Home-Barista.com. The book also set the stage for a variety of water treatment products, like Aquiem and Third Wave Water, which have since emerged to help people manage this fundamental variable more effectively.
Now Colonna-Dashwood and Hendon have returned to make another splash (as it were), with their Peak Water jug offering. Drawing on their knowledge and the perspectives originally offered in the book, they have created a handy, cost-effective household-style filter pitcher which aims to transform regular tap water into something closer to ideal for brewing coffee.
The Peak Water Jug comes with:
- Jug Body - Liner
- Lid & Bypass Pin
- Filter Cartridge
- 2x Water Test Strips
Jug size: 220mm (L) x 270mm (W) x 110mm (D)
Water Chamber: holds 1.2ltrs of filtered water
Porlex Mini II Hand Grinder
Made in Japan.
With its newly designed burr set, the Porlex II can grind beans easier, faster, and more evenly. This results in less fines, less boulders, and more even grounds. Compared to the Porlex I, this grinder can produce roughly 1.3 times more coffee with the same number of rotations. There is no need to worry about the top of the grinder rolling away like a boulder in Indiana Jones – Porlex has redesigned the adjustment nut so that it stands up proud and tall on its own! With the new burr, the per click adjustment changes an average of 37 microns – meaning you can further dial in your Hario V60 recipe. Made in Japan with higher quality materials than its predecessor, the Porlex II punches above its weight – scaring its rivals back to their grinder travel pouch caves.
As with its bigger brother, the Porlex Tall, this grinder has ceramic burrs and a stainless steel housing, which not only makes it easy to clean, but more resilient than glass versions, and produces less static than plastic versions.
This new model features:
New and Improved Ceramic Burr Set Made of Higher Quality Materials than Porlex I Made in Porlex’s Kirishima City, Kagoshima Factory in Japan Grinds Faster, Easier, and More Evenly than Porlex I Ceramic Burrs do not Absorb Water, Smells, and Will Not Rust Each Click Will Make an approximately 37 Micron Change Slim, simple design is very portable and will fit in an AeroPress 22g Approximate Capacity
What’s Included: 1 x Porlex Mini II Grinder 150mm Grinder Handle Rubber Grip/Handle Holder
Dimensions & Capacity: 135mm H x 48mm D x 48mm W Weight: 250g Capacity: 22g Whole Beans
Materials: Laser Etched Ceramic Burrs Made From Japanese Clay Stainless Steel Body Steel Handle Plastic Handle Knob Rubber Sleeve
Yahaha! You found me!
Stay up to date with new coffee releases, events, brewing tips and our stories from origin! Oh, and get 10% off your first coffee order ;)